Bill Bergovoy
New Member
Posts:67
Member Since: 03-24-2007 1:57 AM
 | | 06-29-2009 8:22 PM | | im thinking your format is not right?
mine is like this
img width=800 height=150]http://www.rowelab.com/AquaController/rc_Bergovoy_sig.png[/img
so i am guessing yours should be the same except instead of Bergovoy you would use Altahoe
BTW there are brackets at the beginning and end of the command
img width=800 height=150]http://www.rowelab.com/AquaController/rc_Altahoe_sig.png[/img | | 
| |
|
Al
New Member
Posts:8
Member Since: 06-17-2009 9:50 AM
| | 06-29-2009 8:24 PM | | Thanks, I'll give it a try. | |  | |
|
Al
New Member
Posts:8
Member Since: 06-17-2009 9:50 AM
| | 06-29-2009 9:33 PM | | Finally! Up and running! Yahoo! Thanks, Andy. | | | |
|
Bill Bergovoy
New Member
Posts:67
Member Since: 03-24-2007 1:57 AM
| | 06-29-2009 10:12 PM | | your welcome? | |
| |
|
Al
New Member
Posts:8
Member Since: 06-17-2009 9:50 AM
| | 07-18-2009 9:18 AM | | test
| | | |
|
Ray D
New Member
Posts:2
Member Since: 07-18-2009 6:57 PM
| | 07-20-2009 8:06 AM | | Sig is working great but I cannot edit it. When I click on edit it brings me to a blank page. Any ideas? 
| | | |
|
Scott Rowe
ReefChat Staff
Basic Member
Posts:333
Member Since: 02-17-2007 5:04 PM
| | 07-20-2009 8:18 AM | | When you click to edit, you may need to scroll up in that pane. Check the right side for a scroll bar. | |  | |
|
Ray D
New Member
Posts:2
Member Since: 07-18-2009 6:57 PM
| | 07-20-2009 8:28 AM | | Thank you! I'm a doof!!  _______________________________________________
| | | |
|
ReefChat Administrator
Site Administrator
Basic Member
Posts:282
Member Since: 02-17-2007 1:53 PM
| | 08-08-2009 2:58 AM | | Test your signatures here! | | ReefChat Staff
| |
|
nimrod
New Member
Posts:1
Member Since: 08-08-2009 6:42 PM
| | 08-08-2009 6:42 PM | | Thank you! | | | |
|
jtro
New Member
Posts:5
Member Since: 09-30-2009 8:34 AM
| |
Cabo
New Member
Posts:4
Member Since: 10-12-2009 1:16 PM
| | 10-12-2009 2:38 PM | | Thanks Ashlar for making this available! | | 
Live Camera Feed
210 Island Room Divider with 45 Hex attached for Seahorse(s)
135 Freshwater at work in office | |
|
Scott Rowe
ReefChat Staff
Basic Member
Posts:333
Member Since: 02-17-2007 5:04 PM
| | 10-12-2009 2:44 PM | | No problem, glad you're getting use from it. | | | |
|
Bob
New Member
Posts:1
Member Since: 11-15-2009 11:33 AM
| | 11-15-2009 11:36 AM | | test | |  | |
|
Al
New Member
Posts:8
Member Since: 06-17-2009 9:50 AM
| | 02-07-2010 9:19 AM | | test
| | | |
|
Bill Bergovoy
New Member
Posts:67
Member Since: 03-24-2007 1:57 AM
| | 02-10-2010 11:38 AM | | ok, what happened to my signature???
arrrgh... I hate it when things change/happen on thier own... | |
| |
|
Scott Rowe
ReefChat Staff
Basic Member
Posts:333
Member Since: 02-17-2007 5:04 PM
| | 02-11-2010 5:38 AM | | Your URL is inaccessible.. the DNS is good (resolves to the same ip address as the post you just made) but passing through to your controller seems to not work.
I'd suggest you reset your controller, and if that doesn't fix it, check your router(s) again. | | | |
|
Bill Bergovoy
New Member
Posts:67
Member Since: 03-24-2007 1:57 AM
| | 02-11-2010 7:33 AM | | i can access my controller locally, and remotely... http://66.147.240.164/~thelitu5/TLO...ure=1&pH=1 and, i have reset the controller by unplugging it and waiting then pluggin it back in... I have also reset it by turning it on and off via the controller maybe this will work??? | |
| |
|
Scott Rowe
ReefChat Staff
Basic Member
Posts:333
Member Since: 02-17-2007 5:04 PM
| | 02-11-2010 3:32 PM | | Bill, your external ip address starts with 76.173, not 66.147.. your no-ip client may be setting the wrong ip. | | | |
|
Bill Bergovoy
New Member
Posts:67
Member Since: 03-24-2007 1:57 AM
| | 02-11-2010 3:34 PM | | no, that link is to my website...
It is just showing that the controller is online and updating my database on another host...
| |
| |
|