I'm happy to announce that the sig generator now supports the profilux line of controllers- at least those that have an ethernet port.

When adding a sig for a profilux controller, use just the dynamic hostname that you created in the URL field, without any 'http://' prefix. You'll also need to forward incoming traffic to the controller, which is 10001 by default.

Here's a sample of how a profilux controller setup would look:

And here's how a template would look:

Real nice Signature generator.

What about Profilux 3 cant seem to get it to show the right values.

----------------------------------------------------

As you can see in link Matthias from GHL will help if you need information

http://www.aquariumcomputer.com/For...php?t=1369

Hey Ashlar

I do not know if you've had time to look at it

Do you think it can be done.

It will be so cool 

/Bigman

Hi Ashlar

Any news.

/Bigman

Hi Ashlar

Sound real nice.

I have now made some small corrections in live.html which should make it a little easier after  the new firmvare 5.0i

/Bigman

First of all, I thank you for the work you have done.
Of course I will help, it come here.

First download file (live.txt) save it to a place you can find again.

Ashlar cant attach the file to this post can you place it some where on your site. Then i can link to it in this post.

Now you must use tftp to transfer it to Profilux 3 it can be done from a Command Prompt go to Start -> Run -> type "cmd" hit enter. now you see a black window. Now type "tftp -i [ip on your proilux 3] [path to live.txt] live.html" without brackets, of course.

Hope this can do it.

/Bigman